Single Use IV Filter With Hydrophilic PES 5μm and Hydrophobic PTFE 0.2μm Non-sterile
The single in-line IV filter is designed foer use in filtration of intravenous for removal of particles larger than 5μm from liquids to ensure the purity and safety of a drug or biological sample. It‘s function is to filter out those particles that may have a negative impact on the final product, thus ensuring that the resulting liquid medicine or biological sample is of high quality and purity.
We XINNA 's single use IV filters are typically made of high-quality materials : PES membrane for drug liquid and PTFE membrane for air venting . These materials have good chemical compatibility and can withstand the corrosion of various chemicals and solvents. In addition, these materials also have high temperature resistance properties, which can maintain stable performance in high temperature environments.
Features :
- Easy to connect to IV tubing sets with standard luer inlet and outlet slip
- Precision filtration of fine particles
- High retention efficiency
- Automatic air venting
- Automatic air-stop
- Reduce risk of phlebitis and infusion pain
Characteristics:
| Dimensions: |
57*29.5*0.94mm(inlet/outlet connector included) |
| Weight: |
5..7-5.8g |
| Filtration area: |
6.0CM2 |
| Venting area: |
0.54CM2 |
| Venting air flow rate: |
25ml/min@5kpa |
| Max burst pressure: |
360kpa(52.5psi) |
| Operating Temp: |
5-40℃ |
| Storage Temp: |
0-50℃ |
| Filtration rate: |
PES-PP 5.0μm ≥95%, |
| PES-PP 3.0/2.0/1.2μm ≥90% |
| Min water flow rate: |
PES-PP 1.2μm ≥500ml/10min@10kpa |
| PES-PP 2μm ≥600ml/10min@10kpa |
| PES-PP 3μm ≥800ml/10min@10kpa |
| PES-PP 5μm ≥1000ml/10min@10kpa |
| Sterilization: |
Ethlene Oxide(Max 60℃) |
Applications:
- Medical infusion sets
- Biomedical and Pharmaceutical area
- Laboratory applications
Warnings:
Filter for medical use, assembled in clean room only. Remove the external bag before planting into a clean room.
Handle with care. Keep filter in vertical position with flow arrow on both sides and the printing mark before assembling.
Be careful on glueing, if Hydrophilic PES membrane contact with glue, membrane will breaks down
Alcohol is not allowed to contact with housing, or it will damage the ABS-based housing visible o invisible.It's not recommended to use alcohol or any kind of disinfactant in direct contact with venting membrane, PTFE membrane will become hydrophilic until dried.
Test report, biological and undisclosed information, extra requirment etc., please do not hesitate to contact us
Filters with 1.2μm filter media is not recommended for TPN and lipids administration.
Rigorous testing is recommended before marketing if drugs is not common.
Contact with Xinna-Medical for more information if any doubt is exist advanced.
Product Tags:
|
|
Single Use IV Filter With Hydrophilic PES-pp 5μm and Hydrophobic PTFE 0.45μm Non-sterile Images
|
